Stereo Amplifier

The highly efficient E1X Amplifier is designed with many bespoke technologies and is always in a ready state for high performance operation. The E1X Amplifier is designed to drive any loudspeaker with ultra-low noise, high power amplification delivering full musical detail from your source to your loudspeaker.

The high efficiency of Class D eliminates thermal modulation, making the E1X amplifier resistant to output stage bias wander and sonic ghosting. The output power devices are operating as efficient switches, in that few output devices are needed to deliver considerable audio power. The E1X Amplifier is designed with ultra-short signal paths and uses the absolute minimum number of output devices to deliver over 500 watts of audio power without loss of dynamics, remaining true to the audio source.

Specification

Performance:
Power Output 1% THD per Channel: 500W 4 ohms, 250W 8 ohms
Minimum Load: 2 ohms
Peak Output Current: 27 amperes
Frequency Response: +/-3 dB 0Hz-50KHz, all loads
THD+N: 0.002% 1W, 1KHz, 4 ohms
IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms
Output noise: 35uVRMS A-weighted 10Hz-20KHz
Voltage gain: 27dB (internal switches select for 33dB)

Damping factor: >500
Output Impedance at 100Hz: <16 milliohms
Dynamic Range: 126dB
Input Voltage for Max Output: 2.3Vrms at 27dB gain
Input connections: Single-ended RCA or balanced XLR
RCA input impedance: 10Kohms
Balanced input impedance: 20Kohms
Output connections: 2 sets WBT Nextgen 5-way binding posts

General:
Power On usage: 44W
Standby usage: 0.5W
Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz
Size: 17.75 W x 15.75 D x 3.25 H inches, 451 x 400 x 83 mm
Weight: 13 lbs (5.9 kg)